BXGXP - 660 FLOOR & TRIM VARNISH
- MSDS: BXGXP
- Manufacturer: FARWEST PAINT MFG CO
- Product Name: 660 FLOOR & TRIM VARNISH
- National Stock Number: 8010-00-165-4420
Product Identification
Product ID:660 FLOOR & TRIM VARNISH
MSDS Date:02/01/1993
FSC:8010
NIIN:00-165-4420
MSDS Number: BXGXP
Responsible Party
TUKWILA, WA 98168
US
Emergency Phone: 206-941-1619
Info Phone: 206-244-8844
Preparer: NORMA HABEEB
Cage: 6F266
Contractor
Telephone: 206-244-8844
Cage: 6F266
Ingredients
PETROLEUM SOLVENT
CAS: 64742-47-8
Fraction By Weight: 5.61%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
MINERAL SPIRITS 350
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 53.61%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
XYLENE (SARA 313) (CERCLA)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 0.10%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PHENYL ETHANE
CAS: 100-41-4
RTECS: DA0700000
Fraction By Weight: 0.03%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
530 GRAMS/LITER (LESS WATER)
RTECS: 9999999VO
Fire Fighting
Flash Point Method:TCC
Flash Point:103F,39C
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM,DRY CHEM,WATER FOG,CO2.USE CLASS B
EXTINGUISHING AGENT.WATER UNSUITABLE AS EXTINGUISHING MEDIUM,USE TO
COOL CNTNRS.
Fire Fighting Procedures:FIREFIGHTERS & OTHERS EXPOSED TO VAPORS OR
COMBUSTION PRODUCTS WEAR SCBA. EVACUATE AREA OF UNPROTECTED
PERSONNEL. WEAR PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIX IN AIR &
MAY BE IGNITED BY SPARKS, PILOT LIGHTS, ETC. CLOSED CONTAINRS MAY
RUPTURE WHEN EXPOSED TO EXTREME HEAT.
Exposure Controls
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:282 TO 387F
Vapor Pres:6.0 @ 68F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NIL
Appearance and Odor:CLEAR LIQUID, MILD ODOR
Percent Volatiles by Volume:63
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDANTS, ACIDS, BASES AND EPOXY HARDENERS
UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES. IF PRODUCT
CONTAINS ALUMINUM, MOISTURE IN CLOSED CONTAINERS WILL GENERATE
HYDROGEN GAS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.